Brevo Automation Not Working or Not Sending? How to Fix It

Coding Liquids tutorial cover featuring Sagnik Bhattacharya for Brevo Automation Not Working or Not Sending? How to Fix It.
Coding Liquids tutorial cover featuring Sagnik Bhattacharya for Brevo Automation Not Working or Not Sending? How to Fix It.

A Brevo automation that is not sending usually fails at one of five points: it is not active, the contact does not match the trigger or its filters, re-entry is off, a Free or Starter limit has been reached, or the sender and domain are not set up. Check Automations, then Logs, then Workflow logs to see which.

The Complete Excel Course with AI Integration

From formulas and pivot tables to Power Query, DAX, VBA and AI with Copilot, ChatGPT and Claude — hands-on from the first lesson.

By Sagnik Bhattacharya and Virginia Thorn, Primetime Emmy Award winner

Buy now

Guessing wastes hours, and the dashboard tells you more than most owners expect. Brevo records every step a contact takes, so the first job is to find one contact who should have received an email and read their trail. The sections below give a three-minute diagnosis, a symptom-by-symptom table, and fixes for triggers, lists, re-entry, delays, limits and sender authentication, using an online clothing store, a craft brewery supplier and a kitchen fitter as examples.

How do you diagnose a Brevo automation that is not sending?

Diagnose a silent Brevo automation by reading the trail of one real contact who should have been emailed, checking three places in order.

  1. Automations, then Workflows. Is the automation's status active, not paused or draft? Brevo's help centre says a paused automation lets no new contacts in, though those already inside continue.
  2. Automations, then Logs, then Contacts in workflows. Search the contact. If they appear, you will see the automation, the step they are on and when they entered. Brevo says this page also shows contacts who are on hold at a waiting point, which explains many "nothing arrived" complaints: they are simply waiting.
  3. Automations, then Logs, then Workflow logs. Filter by the contact's email address. Each entry shows the date, automation, step and a message such as "Contact has exited workflow" or an error. Brevo's example is exactly this case: a contact says they did not receive the email, so you check whether they received it, are in a waiting step, or hit an error.

If the contact appears nowhere, they never entered, which points at triggers, filters, imports or limits. If they entered and exited quickly, look at the step before the email. If the email step shows as sent, the problem is deliverability, and the sender sections below apply. Workflow logs can be downloaded as a CSV file, and Brevo keeps them for 24 months, subject to a plan cap of 100,000 logs on Free, 300,000 on Starter and 600,000 on Standard.

Which symptom matches your silent Brevo automation?

Find the row in this table closest to what you see, then follow its check. Use it after the diagnosis above.

What you seeLikely causeWhere to checkFix
Nobody enters, everAutomation not activated or pausedWorkflows list statusClick Activate automation; new contacts only enter once active
Some contacts enter, some do notContact does not meet the trigger or its contact filtersTrigger settings, filtersCompare a contact who entered with one who did not, attribute by attribute
Imported contacts never start the welcome flowLarge import with the "added to a list" triggerContacts in workflowsSend a campaign for the one-off audience; keep the automation for new sign-ups
New contacts stopped entering this month2,000 unique contact entry cap on Free and StarterEmail notices at 80% and 100%Upgrade, or accept the cap; after upgrading, list-trigger contacts must be removed and re-added
Same person never gets the flow a second timeRe-entry not allowedSettings tab, audience settingsTurn on Allow contact re-entry after exit; set a wait time
Contact manually added but nothing happensAlready in the automation or exited without re-entry permissionContacts in workflowsAllow re-entry first, then add them again
Email arrives hours or days lateDelay, wait step or a send-time windowThe step before the email, and email step's additional settingsCheck the delay, and whether sending is limited to a custom timeframe
Step shows "skipped" in a testMessage step not saved properlyTest results on the automationReopen the Send an email step, complete every section, save
Email not sent from a linked templateTemplate inactive or has no senderLinked template label in the stepActivate the template or add a sender in the step's Sender section
Shop events never trigger itTracker did not identify the visitor, or event names differTracker install, event namesMatch event names exactly; identify visitors by login or form
Logs say sent, customer says nothing arrivedSpam, Promotions tab, firewall or asynchronous bounceBrevo's delivered-but-not-received article, contact statusAuthenticate the domain, send tests to several mailbox types
Free plan sending stops mid-day300 emails a day limitAccount plan pageUpgrade to a plan with no daily limit, or spread sends over days

The rest of this tutorial explains the rows that cost owners the most time.

Why does a contact not enter a Brevo automation?

A contact does not enter a Brevo automation when it fails the trigger or the event and contact filters on that trigger. A trigger is the set of conditions that puts a contact into an automation. Brevo's new editor offers more than 20 triggers, and you can combine several in one automation, so a contact enters if at least one trigger matches. Then you can refine each trigger with event filters and contact filters, and a contact must pass both to enter. Contact filters work like those on the Contacts page: attributes, email activity, subscription status, website interactions and more.

That second layer causes quiet failures. Brevo's own example: the entry point is "VIP equals YES". A contact whose VIP attribute says NO will never enter, however many times they sign up. The same goes for action triggers: if the trigger is clicking a link in a campaign, opening the email is not enough.

A worked diagnosis for an online clothing store

Say a shop builds a welcome flow with the trigger "contact added to list: Newsletter" and a contact filter "subscribed through double opt-in". Over a month, 410 people sign up, but only 290 receive the welcome email. The owner expects the other 120 to be bugs.

Comparing two contacts shows the pattern. The 120 missing people joined through a checkout tick-box that adds them to the list without a confirmation email, so they never counted as double opt-in. The automation behaved exactly as configured. The fix is a decision, not a repair: either confirm those contacts properly, drop the filter, or build a second branch for them with a short confirm-your-email message first. Check the filter against the question "who do I actually want in this flow?" before blaming the tool.

Why do imported contacts never enter a Brevo automation?

Imported contacts may not enter a Brevo automation when the trigger is "a contact is added to a list" and you import a large number at once, as Brevo's help centre says. The contacts import correctly but are not added, because Brevo Automation is for behaviour-based messages, not mass emailing.

Three ways round it, depending on the goal:

  • A one-off send to everyone: use an email campaign, which is what the tool is designed for. The first campaign tutorial covers the steps.
  • Offline or migrated contacts who should get the welcome flow: add the trigger "Contact added manually" and add contacts by hand. Brevo's manual route allows up to 500 contacts at a time, from the Contacts page or a single contact's page, and you repeat for larger groups. Contacts already in the automation, or who exited and may not re-enter, are not added even if you add them again.
  • A small test: manually add five contacts, including yourself, and watch the logs before opening the flow to everyone.

The manual route needs the automation to be active first, and the person adding the contacts needs the permissions to view contacts and to create or edit automations.

If you check imported lists and exported logs in a spreadsheet, try The Complete Excel Course with AI Integration on Coding Liquids.

How many contacts can enter automations on Brevo Free and Starter?

On Free and Starter, 2,000 unique contacts can enter your active Brevo automations, according to Brevo's help centre. A contact in two automations counts once. Existing contacts continue; new ones simply cannot enter. After you upgrade to Standard or above, blocked contacts enter automatically if they still match, except when the trigger is "a contact is added to a list", in which case you need to remove them from the list and add them back. Brevo emails you at 80% and at 100%.

One plan detail to know when you compare tiers: Brevo's plan overview lists marketing automation for Standard with unlimited contacts, and lists multi-channel automation up to 2,000 contacts on Free. Brevo's pricing page lists marketing automation among the features under Standard. The wording differs, so read your own plan page before relying on any automation on a lower plan. For a cost comparison at 5,000 contacts, see Brevo versus Mailchimp for a small business, and for the sending-limit side see how Brevo charges for sending and contacts.

The free-plan daily limit

The Free plan includes 300 email sends a day, with unused sends not rolling over. Brevo documents what happens beyond that for two kinds of email: up to 1,000 extra transactional emails wait in a retry queue, and a campaign sent to more than 300 recipients reaches only 300 on the scheduled day, with the rest needing a manual Requeue. I did not find equivalent wording for automation emails, so if you send many automated emails on Free, test on a busy day and ask Brevo's support how they behave once the limit is reached.

How do re-entry, exit and restart rules work in Brevo?

Brevo's re-entry, exit and restart rules live in the automation's Settings tab, where Brevo describes three controls.

  • Re-entry after exit. Switch on Allow contact re-entry after exit so a contact can enter again after exiting if they match the trigger again. Keep it off to allow a single pass. You can add a wait time before they are checked again.
  • Exit conditions. A contact leaves immediately when an event happens, wherever they are in the flow. Brevo's example is a sales sequence that stops once the contact sends a message.
  • Restart conditions. A contact goes back to the first step after the trigger when an event happens.

Brevo's guidance is that a welcome flow normally runs once per person, while an abandoned-basket flow should allow many entries. A craft brewery supplier running a "haven't ordered in 90 days" reminder would turn re-entry on with a wait of 90 days, so a customer who lapses again next year gets another nudge but nobody is emailed every week. And if something should stop the flow early, such as the customer placing an order, add that as an exit condition. Otherwise someone who ordered yesterday still gets tomorrow's "we miss you" email.

Why is my Brevo email waiting instead of sending?

A Brevo email that seems not to send is often waiting at a time delay or a wait-until-event step. Brevo distinguishes two pauses. Time delay holds a contact for a fixed time, then moves them on regardless. Wait until an event happens holds them until they do something within a time frame, then sends them down a Yes or No branch. Both have a 60-month maximum.

The Send an email step has its own scheduling under Additional settings. You can restrict sending to a custom timeframe of days and hours, choose the time Brevo calculates to maximise opens for each recipient, or pick a specific date. Brevo warns that if you add a delay and also schedule a sending time, the delay may not be applied. So a "send two days after sign-up" flow with a Tuesday-morning window may fire at a different moment from what you pictured. Check the step before the email, then the email step's own settings, in that order.

Which sender and domain settings stop a Brevo email sending?

When the logs show the Brevo email step ran but customers never see the message, the cause is the sender, the domain authentication or the receiving mailbox. Three checks, in order of cost.

  1. Is a sender set on the step? In the Send an email step, the Sender section holds the address and name. Brevo says that if a linked template is inactive or has no sender, the emails are not sent, so activate the template or add a sender in the step.
  2. Is the domain authenticated? In Brevo go to Settings, then Senders, Domains, IPs, then Domains, and use Add a domain. Brevo says you can authenticate only a domain you own and control, and that free-mail addresses such as Gmail or Yahoo cannot be authenticated. Its recommended route is automatic authentication, where Brevo connects to your domain provider and adds the records. The manual route needs a Brevo code (TXT record), a DKIM record (one TXT or two CNAME) and a DMARC record (TXT). If your domain already has a DMARC record, Brevo asks whether to replace it; if you do not want to, authenticate manually instead.
  3. Are messages landing somewhere odd? Brevo's article on delivered-but-not-received emails lists asynchronous bounces (rejected later by the recipient's server), corporate firewalls that block mail from your domain sent through a third party, and the spam folder or Promotions tab. Its suggestions include double opt-in sign-up forms, cleaning contact lists and sending test emails to see where they land.

Domain records sit with whoever runs your domain, sometimes a web designer or an IT contractor. Brevo says you can ask someone else, such as your IT team or your domain provider's support team, to complete the authentication. Allow for that delay when you plan a launch.

Contact status: blocklisted, unsubscribed, bounced

Brevo says a blocklisted contact is excluded from receiving communications on a channel: they unsubscribed, marked an email as spam, hard-bounced, or were blocklisted by hand. In email campaigns they are skipped and cost no credits. Brevo advises keeping blocklisted contacts in your account rather than deleting them, so you cannot accidentally re-import them as subscribed. Their article covers campaigns and transactional email specifically; I did not find an automation-specific statement, so when a single contact never receives anything, open their contact page, check for blocklisting, and look at the Active automations section there.

Why does a shop-event trigger not start my Brevo automation?

A Brevo shop-event trigger, such as an abandoned basket, will not start the automation when the tracker has not identified the contact. Brevo's help page says contacts must be identified by the tracker, which happens when they create an account, submit a Brevo form or click a link in a Brevo email. A visitor who typed an email address at checkout without any of those is not identified, and will not enter. Brevo also says identified contacts are recognised once they are logged in, so a login page matters, or you need to add an identification request.

If you installed the tracker by hand, you must create custom track events, and the name on your website must match the name in the automation exactly. If you use a Brevo plugin, check whether it creates the three standard events for you. A kitchen fitter with a quote-request form on the website avoids all of this by using a Brevo form as the trigger instead of a tracked event.

How do you test a Brevo automation before it goes live?

Test a Brevo automation with the Test button, available in the new editor once there is at least one message step, which sends the messages to a contact you choose, such as yourself, including those in split branches. Test messages use credits like normal ones. Each step shows as Processed or Skipped. Skipped means the action could not run, so recheck that the step was saved. Close the results and you cannot reopen them, so note what you see.

A practical routine before any automation goes live:

  1. Test with your own address and one address on a different mailbox provider.
  2. Manually add three contacts who match the trigger and three who do not. Confirm the logs show the first three entering and the others not.
  3. Read the workflow log ten minutes later, not the next day.
  4. Set a calendar reminder for one week on, to compare "contacts who should have entered" with "contacts in workflow".

The welcome flow that ignored 3,200 imported subscribers

An illustration of the import trap. A clothing store moves its subscribers from another email tool on a Monday, 3,200 contacts in one import into the Newsletter list. The welcome automation, triggered by "added to list", was meant to introduce the brand to the newcomers. By Tuesday, Contacts in workflows shows nothing, and the owner blames the automation.

The import was large, and Brevo's help centre says exactly this: such contacts import correctly but may not enter. Nothing was broken. The remedy was to send a one-off campaign to the 3,200 and keep the automation for new sign-ups from then on, which Brevo points out is what campaigns are for. The owner could also have used the manual route in batches of 500, seven rounds, if each person truly needed the multi-email flow. Either way, the diagnosis took two minutes once the logs were open. If you would rather have someone look at your setup with you, that is the sort of job my AI implementation consultation covers; see the contact page.

Brevo automation questions from small senders

Why do contacts I imported never enter my Brevo automation?

Because a large import under the added-to-a-list trigger may not start the automation. Brevo's help page says the contacts import correctly but are not added, since automations are meant for behaviour-based messages, not mass sending. Use an email campaign for the one-off send.

Does Brevo's free plan limit automations?

Yes. Brevo's help centre says only 2,000 unique contacts can enter active automations on Free and Starter, counting a contact once across automations. Existing contacts keep moving, but new ones cannot enter above the limit. Brevo emails you at 80% and at 100%, so check that those notices are not landing in spam.

Can a contact go through the same automation twice?

Only if re-entry is allowed. In the automation's Settings tab, Allow contact re-entry after exit lets a contact enter again once they exit and match the trigger again, optionally after a wait time you set. Leave it off for welcome emails, switch it on for repeatable events like abandoned baskets or re-orders.

How do I find out what happened to one contact?

Go to Automations, then Logs. Workflow logs show each event for an automation or contact with date, step and message. Contacts in workflows shows who is active or on hold at a waiting step, and lets you remove up to 30 contacts at a time. You can also download either log as a CSV file.

Why is my Brevo automation not sending?

Usually one of five causes: the automation is not active, the contact does not match the trigger or its filters, re-entry is off for someone who already went through, a Free or Starter limit has been reached, or the sender and domain are not set up. Read one contact's trail in the workflow logs to see which.

Does pausing a Brevo automation stop contacts already inside?

No. Brevo's help centre says a paused automation lets no new contacts in, though those already inside continue. A paused or draft status is therefore one of the first things to check when nobody new enters, so look at the status in the Workflows list before anything else.

Further reads

Sources: Brevo Help Centre articles on automation entry and exit conditions, contacts not entering automations, automation logs, the Send an email step, testing automations, wait steps, blocklisted contacts, domain authentication and the Free plan, plus Brevo's pricing page (read 17 November 2026).

Rather not work this out alone?

An AI implementation consultation is a one-to-one call with me, not an agency or a sales team. You leave knowing what AI you can use in your business and where to start.

Book a 1:1 call with me