Zapier Agents bill in activities, a separate pool from Zap tasks. Free includes 400 activities a month and Pro 1,500, with one activity per trigger, search, knowledge answer or action. An agent that handles each of 200 leads in five steps uses about 1,000 activities, while the equivalent Zap uses about four tasks a lead with your own AI key, or up to eight on a cautious count.
The Complete Excel Course with AI Integration
From formulas and pivot tables to Power Query, DAX, VBA and AI with Copilot, ChatGPT and Claude — hands-on from the first lesson.
By Sagnik Bhattacharya and Virginia Thorn, Primetime Emmy Award winner
Buy nowThose 1,000 are an illustration built from Zapier's own counting rules, not a Zapier quote, and the sections below rebuild the sum so you can redo it for your workflow. The key point is that the two meters never mix: a month of agent work does not touch your task allowance, and a month of Zaps does not touch your activities. You pay attention to both, and to a per-run cap that quietly shapes what an agent can do.
What counts as one activity in Zapier Agents?
Zapier counts one activity for each trigger, knowledge-source answer, action, web browse or scrape, web search and Chrome extension message an agent uses. Zapier's agent pricing page lists these as the things that each count as one activity. That list is short and precise, which makes the counting easy once you can see the agent's steps.
Two contrasts with Zaps matter. In a Zap, the trigger and filter steps do not use tasks, and neither does Formatter or a Delay step. Only the action steps count. In an agent, the trigger itself is an activity. So an agent that wakes up for a new lead starts at one activity before it has done anything. Second, a Zap's steps are fixed in advance, so its task count per run is predictable. An agent decides its own steps within your instructions, so the number of activities can vary from lead to lead, which is why the cap exists.
| Measure | Zap tasks | Agent activities |
|---|---|---|
| Trigger counts? | No | Yes, one |
| Action step counts? | Yes, one per step run | Yes, one per action |
| Searching the web or a knowledge source | Only if built as a step | One per search or answer |
| Steps fixed in advance? | Yes | No, the agent chooses |
| Free allowance | 100 tasks a month | 400 activities a month |
| Cap on one run | None stated | 10 on Free, 40 on paid plans |
| Shared pool? | Separate | Separate from tasks |
Zapier states that Free gets 400 activities a month and Pro gets 1,500. Enterprise is custom through sales. On Team and Enterprise, activities are shared across the whole account, and Zapier's help centre does not state a Team allowance, so a Team owner should ask rather than assume. For the rest of this tutorial I use Free and Pro, where the numbers are published.
How many activities does an agent use on 200 leads a month?
An agent that handles 200 enquiries a month in five steps each uses about 1,000 activities, on the illustrative counting below. Take an illustrative car repair garage that receives about 200 website enquiries a month. Each time a form arrives, an agent should read it, decide whether it is a booking, a quote request or a question, check a short knowledge document of prices and opening hours, write a draft reply and log the lead in a spreadsheet. A human reads the draft before it goes.
Here is the activity count per lead for that design, using Zapier's counting list.
- Trigger: new form entry. 1 activity.
- Answer from the knowledge source: prices and hours. 1 activity.
- Action: add a row to the lead sheet. 1 activity.
- Action: create a draft reply in the email account. 1 activity.
- Action: send a short Slack message to the owner. 1 activity.
That is 5 activities a lead and 1,000 for 200 leads. Against the published allowances, Free (400) covers 80 leads, because 400 divided by 5 is 80. Pro (1,500) covers 300 leads, since 1,500 divided by 5 is 300. So the garage's 200 leads fit inside Pro with 500 activities to spare, and are far beyond Free. The spare 500 matters, because some leads will trigger extra searches or retries.
How many tasks does the same job use as a Zap?
The equivalent Zap uses about four tasks per enquiry if the AI step runs on your own key, or up to eight on a cautious count with Zapier's own model, because the trigger is free and the steps are fixed. The garage's Zap might use an AI step to classify the enquiry, a Formatter step to tidy the phone number, a Google Sheets action to add the row, an email action to create the draft and a Slack action to notify the owner. Formatter does not use tasks. Zapier's task counts for AI steps vary by model tier, and its pricing page does not give a number I can state with confidence, so count the AI step conservatively at up to five tasks if you use Zapier's own model, and one if you bring your own key.
| Zap step | Tasks per lead |
|---|---|
| New form entry (trigger) | 0 |
| AI classification (conservative) | up to 5 |
| Formatter: tidy phone number | 0 |
| Add row to the sheet | 1 |
| Create email draft | 1 |
| Slack message | 1 |
| Total, conservative | up to 8 |
| Total with own key (AI step at 1) | 4 |
At 4 tasks a lead, 200 leads use 800 tasks a month; at 8 they use 1,600. Zapier's Pro plan comes in task tiers, with prices on its pricing page of $19.99 a month for 750 tasks and $39 for 1,500 when billed annually, so the Zap route would sit around the 1,500-task tier in the conservative case. That makes a Zap and an agent comparable in cost for this particular job, and the Zap gives you a fixed, predictable count. The agent gives you judgement on messy enquiries. Which wins depends on how messy your leads are, not on the headline price.
If you are weighing the two approaches for something other than leads, the older tutorial on when Zapier gets too expensive shows how to find the tipping point for task-based plans.
What is the per-run cap on Zapier Agents, and why does it matter?
Each Zapier agent run is capped at 10 activities on Free and 40 on paid plans, and at the cap the agent asks before continuing. For a human sitting there, that is a minor prompt. For an agent triggered by a form at 2am, it is a stalled run with a draft half made.
Count the garage agent against the Free cap. Its five-activity design fits inside 10 with room for one retry. But suppose the instruction says "research the customer's vehicle online before replying". The agent might run three web searches and browse two pages, adding five more activities: 10 in total, right on the Free cap, with no space for the action steps still to come. On Pro, with a cap of 40, the same design is comfortable.
The practical rules follow from that.
- Write the instruction so each run has a bounded list of things to do. "Search once" beats "research thoroughly".
- Tell the agent what to do if it cannot find something, such as "write the draft without it and flag it", so it does not wander.
- Keep an eye on the longest run each week, not just the average.
A bounded instruction also makes costs predictable, which is the whole point of counting in advance.
A sample instruction with a bounded activity budget
Here is an illustrative instruction for the garage agent. Note the limits written into it.
When a new enquiry arrives:
1. Read it and classify it as BOOKING, QUOTE or QUESTION.
2. Answer only from the knowledge document "Prices and hours".
Do not search the web. If the document does not cover it, say so.
3. Add one row to the "Leads" sheet: date, name, phone, class, summary.
4. Create one draft reply. Do not send it.
5. Post one Slack message to the owner with the class and a link
to the draft.
Never take more than six steps per enquiry. If you need more, stop
and post "Needs a person" in Slack instead.
The last line is the budget. It keeps a run well under the Free cap of 10 and leaves headroom on Pro. It also turns an overrun into a message to a human, instead of a silent stall.
A returns desk walked through activity by activity
A second illustration. An online clothing store gives an agent one job: when a customer emails about a return, read the message, check the returns policy in a knowledge document, reply with a draft and log the case. The ledger for one typical email looks like this.
| Step the agent takes | Activity type | Running total |
|---|---|---|
| New email in the returns label | Trigger | 1 |
| Look up the 30-day policy wording | Knowledge answer | 2 |
| Look up the order in the order sheet | Action | 3 |
| Create a draft reply | Action | 4 |
| Add the case to the returns log | Action | 5 |
Five activities, as for the garage. Now the awkward email: a customer who mentions two orders and a damaged item. The agent looks up both orders (2 actions instead of 1), answers a second policy question (another knowledge answer) and logs two cases. That email costs 8 activities, still under the Free cap of 10 but 60% above the typical case. If 15% of emails are like that, the average is about 5.45 a run, not 5. Over 350 emails that is roughly 1,900 activities, which is above Pro's 1,500. The cheap-looking design only fits if the odd emails are handled by a person or split into a separate flow. This is why the highest run, not the average run, goes into the sum.
A weekly meter review, filled in
Keep a one-page record. Below is a sample for the garage after its first full week on Pro. The numbers are illustrative.
| Measure | Week 1 | What to do |
|---|---|---|
| Runs | 52 | Expected about 46: note the busy Monday |
| Activities used | 301 | 5.8 a run, above the planned 5 |
| Largest single run | 14 | Open it and find the extra steps |
| Projected month | about 1,300 | Fits Pro with 200 spare |
| Runs that asked to continue | 0 | No action |
The 14-activity run is the interesting line. Opening it showed, in this illustration, that a customer had attached a long document and the agent had run extra searches to answer from it. The fix was a one-line instruction: "Do not read attachments; flag them for a person." The next week's largest run dropped to 7. Without the review, the pattern would have eaten the allowance quietly.
If the spreadsheet side of this weekly record is the slow part, try The Complete Excel Course with AI Integration on Coding Liquids.
Rewriting a loose instruction into a bounded one
The quickest way to control activities is to tighten the instruction. Here is a before and after for the garage agent.
BEFORE: Look after new enquiries. Find out what the customer needs,
research anything useful and get back to them nicely.
AFTER: For each new enquiry: classify it, answer only from the
"Prices and hours" document, add one row to the Leads sheet, create
one draft reply, post one Slack note. Maximum six steps. If the
enquiry mentions a vehicle problem not in the document, write
"Needs a mechanic" in the draft and stop.
The before version has no ceiling. It invites research, which means web searches, which means extra activities, with a result no one can predict. The after version has a visible ceiling of six, and it states what to do at the edge. The behaviour is also easier to review, because you can compare what happened with five clear instructions rather than one vague one.
Why does the Team plan change the activity sum?
On Team and Enterprise, Zapier says activities are shared across the whole account, so if three colleagues each build an agent, all their runs draw on one pool. Zapier's help centre does not state a Team allowance, so a team of three cannot assume it is three times the Pro figure. Ask Zapier for the number before you let several people build agents, and write one owner for the meter. The decision between plans for several users is covered in Zapier Professional vs Team Plan.
Which Zapier Agents allowance does a business need?
Multiply the runs per month by the activities per run, then compare the result with 400 on Free or 1,500 on Pro. Three illustrative cases follow.
| Business | Runs a month | Activities per run | Total | Fits |
|---|---|---|---|---|
| Pest-control firm: log and reply to callback requests | 120 | 4 | 480 | Pro, not Free |
| Online clothing store: tag and answer returns questions | 350 | 3 | 1,050 | Pro |
| Furniture maker: triage quote requests | 40 | 5 | 200 | Free |
The furniture maker fits inside Free with half the allowance to spare. The pest-control firm misses Free by 80 activities, which is a good reminder that a small change in steps per run decides the plan: if it cut one step from each run, 120 runs at 3 activities is 360, which would fit Free. That is a sum worth doing before you pay. Remember too that a retry or an extra search is billed like any other activity, so add 10% to 20% to your estimate for the first month.
How to check the meter and the budget in practice
Zapier shows usage inside your account, and the figures to watch are the month-to-date activities and the largest run. A simple routine keeps you out of trouble.
- Before launch, estimate activities per run from your instruction, using the counting list above.
- Run ten test leads and note the activity count of each. Take the highest as your planning number.
- Multiply your expected runs by that highest number, not the average. If it fits the allowance, you have headroom.
- After a week of live use, compare real usage with the estimate. If it is 30% higher, find which extra step is responsible.
- Set a reminder at the 70% mark of the month's allowance, because the agents stop at the limit (see the next point).
That last point deserves emphasis. Zapier's help centre says that when activities run out your agents stop working until the next billing date or an upgrade, so a lead arriving on the last day of the month may get no agent reply. Keep a buffer, and note that testing counts towards the allowance on Free but not on paid plans.
If you want help fitting Zapier agents into how your business actually runs, I offer one-to-one AI consultations for small businesses.
When is a Zap better than a Zapier agent?
A Zap is the better tool when the job has a fixed shape, such as copying a form entry into a sheet and sending an acknowledgement, because it costs fewer units and cannot wander. Agents are priced for flexibility. The honest test is whether a human would need to make a judgement the Zap cannot express in a filter. Enquiries that must be sorted by reading messy free text are agent territory. Enquiries that arrive through a dropdown with five options are not.
A common hybrid is cheaper than either: let a Zap do the fixed steps and call an AI step only for the classification. That keeps the bulk of the work in predictable task counts. The tutorial on how to add AI steps to Zapier covers building that, and how to stop Zapier and Make automations breaking silently explains how to notice when a run stalls.
What mistake do people make when budgeting agents like Zaps?
The common mistake is to treat 400 activities as four times the capacity of 100 tasks, when the two measure different things and cannot be compared one to one. An owner reads "Free: 400" and "Free: 100 tasks", concludes the agent is four times more generous, and builds a flow of six steps. Six activities a lead exhausts 400 activities after 66 leads, whereas the same six steps in a Zap at 100 tasks would have failed sooner in a different way.
It shows up as a month that ends on the 18th. The fix is the count-first habit above: write the steps, count the activities, multiply by volume and compare with the allowance before switching anything on.
Should you check the live price before choosing a Zapier Agents plan?
Yes, check the live pricing page first, because this tutorial quotes no separate price for agents on Pro: it could not be tied to the task-plan prices above. Look at the Agents tab on the live pricing page for the number that applies to your plan and billing period, and confirm the allowance in your own account. Plan names and allowances change, and Zapier labels the paid individual tier as Pro on its current page. The figures in this tutorial were read from Zapier's pages in November 2026.
For a wider view of automation costs including the AI model, read OpenAI Pricing Calculator: Cost a Zapier or Make Automation First. If you are not yet sure which of your routines deserve an agent at all, the automation audit tutorial helps you decide.
Zapier Agents billing, answered
Do agent activities use up my Zap tasks?
No. Zapier's agent pricing page says using activities does not affect your task usage, and adding Agents does not change your plan's task allowance. The two are separate pools. A business can run out of one while the other is untouched, so watch both usage meters.
What happens when I use all my monthly activities?
Zapier's help centre says your agents stop running: they cannot use actions, trigger, browse, search the web or search knowledge sources until your next billing date or an upgrade, although you can still chat with the agent. Zapier emails you at 80% of the limit and again when you reach it, and an agent may slightly exceed the limit to finish a run without charge. Zap-task overage billing is a separate system for tasks only.
Why did my agent stop halfway through a run?
Each run has a cap: 10 activities on Free and 40 on paid plans. At the cap, the agent asks before continuing, so an unattended run can stall waiting for you. Tighten the instructions so the agent does less per lead, or raise the plan if you need longer runs.
Is a trigger really billed as an activity?
Yes. Zapier lists using a trigger among the actions that count as one activity each, alongside knowledge answers, actions, web browsing or scraping, web searches and Chrome extension messages. In a Zap, by contrast, triggers do not use tasks. That difference is the main reason the two bills cannot be compared one for one.
Further reads
- Zapier vs Make vs n8n for AI Automation: Which Fits Your Business? — Alternatives when billing by activity does not suit.
- Zapier for Accountants: Five Automations for Intake and Reminders — Five Zaps for a small practice, task counts included.
- Native Integrations vs Zapier: Which Should Connect Your Apps? — When a built-in integration beats a Zap or agent.
- Zapier for Photographers: Automate Enquiries, Contracts and Reminders — Enquiry automation walked through for a small studio.
- How to Connect Claude to an App With No Connector Using Zapier — Wire one connector-less app into Claude through Zapier MCP: pick the actions, lock the fields, cost each call at two tasks and keep approvals on.
Browse all AI-for-business tutorials
Sources: Zapier pricing page (zapier.com/pricing) and its Agents pricing page (zapier.com/l/agents-pricing), read in November 2026.
